Intense Consistency Decorative Coating with Metallic and Nacreous Shadow Effects

Mirzasto is a paste-like acrylic emulsion-based special decorative coating, designed for easy application and effortless patterning.

APPLICATION AREA

Mirzasto is applied to interior walls, plaster, exposed concrete, and wooden surfaces following surface preparation with an appropriate primer. It is typically used in conjunction with the final coat product, Effect Finish.

FEATURES

• Easy application due to special fillers.

• Effortless patterning and sanding.

• High vapor permeability allows the surface to release moisture and breathe.

• Prevents early drying, ensuring smooth application.

• Water-based formulation is harmless to human health and the environment.

APPLICATION INSTRUCTIONS

1. Thoroughly clean the application surface, removing dirt, stains, peeling paint, and dust.

2. Correct any unevenness on the surface using San Deco Acrylic Putty Interior to achieve a smooth base.

3. Apply San Deco Decoprimer as a primer to ensure good adhesion and a consistent finish.

4. Mix Mirzasto thoroughly to achieve a homogeneous consistency without thinning.

5. Apply Mirzasto to a 1-2 m² area using a steel trowel. Then, create the desired decorative effect using a plastic or steel spud in irregular patterns. Before Mirzasto dries, create smooth and striped patterns if desired.

6. Allow 4 hours at 23°C (220/260) for drying, then use grained sandpaper to remove irregularities.

7. Apply Effect Finish coats in sequence, following the color catalog, with a 3-hour interval between coats.

8. Effect Finish application:

   • Start applying Effect Finish 4-5 hours after Mirzasto has been applied according to its instructions.

   • Apply Effect Finish with a plastic or steel trowel without thinning.

   • Allow 2 hours between each coat.

   • To highlight Mirzasto's design and patterns, remove surface roughness using a steel trowel.

9. Maintain an application environment temperature of +5°C to +35°C for 24 hours during and after the application process.

COVERAGE

Mirzasto:

Depending on surface smoothness, porosity, and application methods, for a single coat application:

• 1 liter covers 4.0 – 5.0 m²

• 1 kg covers 2.3 – 2.9 m²

• Paint consumption per 1 m²: 200 – 250 ml / 350 – 450 g

Effect Finish:

Depending on surface smoothness, porosity, and application methods, for a single coat application:

• 1 liter covers 16.0 – 20.0 m²

• 1 kg covers 15.7 – 19.7 m²

• Paint consumption per 1 m²: 50 - 62.5 ml / 50 - 65 g

TOTAL COVERAGE

A set consisting of Mirzasto and 2 Effect Finish products covers an average area of 12-15 m².