Amarsis is a decorative coating system based on acrylic emulsion, offering a silver or gold finish.

APPLICATION AREA
Amarsis enhances interior walls, adding depth and character. It is applied over properly prepared surfaces including walls, plaster, concrete, and wood, using the appropriate primer.

FEATURES

• Provides reflective gold and silver finishes.
• Water-based, safe for both human health and the environment.

APPLICATION INSTRUCTIONS

1. Surface Preparation

   • Clean the surface to remove dirt, grease, blistered paint, and dust.
   • Use San Deco Acrylic Putty Interior to fix any surface imperfections.
   • Apply San Deco Amarsis Primer as an undercoat after surface preparation.

2. Brush Application

   • Mix Amarsis gently with a spatula (do not dilute) and avoid using mechanical mixers.
   • Apply a single coat using a special brush.
   • After 25 minutes, smooth the surface with a stainless steel trowel.
   • After 4-5 hours (at 23°C), apply a second coat using the brush.
   • One hour later, apply pressure with the stainless steel trowel to create light and dark shades.

3. Trowel Application

   • Apply Amarsis with a steel trowel as a single coat.
   • After 4-5 hours (at 23°C), apply a second coat using the same technique.
   • After one hour, apply pressure with the stainless steel trowel to create the desired shading effects.
   • Ensure the ambient temperature is between +5°C and +35°C for 24 hours during and after application.

COVERAGE

• 1 liter covers 7.5 – 9 m²
• 1 kilogram covers 7.5 – 9 m²
• Paint consumption per 1 m²: 110-130 ml / 110-130 g