Travertine and Natural Stone Effect Coating

APPLICATION AREA

Travertino is suitable for application on all interior walls, plaster, exposed concrete, and wooden surfaces. It should be applied over an appropriate primer following proper surface preparation.

FEATURES

• Versatile Design: Travertino enables the creation of various decorative patterns during application.
• Breathable Surface: Its high water vapor permeability allows moisture to escape, preventing trapped humidity and enabling the surface to breathe.
• Eco-Friendly: Being water-based, it is safe for both human health and the environment.
• Pleasant Fragrance: Its perfumed formula enhances the application experience with a refreshing scent.

APPLICATION INSTRUCTIONS

• Prime the surface with Decoprimer, diluted with 25-30% clean water by volume. Apply a single coat using a roller.
• Allow the primer to dry completely for 24 hours.
• Once fully dry, apply Travertino to the surface.
• Apply two coats of Travertino using a steel trowel, without dilution.
• The first coat should have a minimum thickness of 1 mm.
• After at least 6 hours, apply the second coat using the same trowel technique.
• While the product is still wet, use a Texturing Float to create the desired effect.
• Once the surface is relatively dry, lightly mist it with clean water and smooth it using a steel trowel.
• Allow the coating to dry completely for 48 hours.
• Once fully dry, multiple Pearlescent Decorative Finish colors can be applied if desired.
• To complete the process, apply the selected Decorative Finish color with a roller and gently blend it using a damp sponge.
• Allow an additional 24 hours for complete drying.

COVERAGE

Coverage may vary based on surface smoothness, porosity, and the chosen application method:

• 1 liter covers approximately 1.75 to 2.35 m².
• 1 kilogram covers around 1.00 to 1.35 m².
• Typical consumption per 1 m²: 425-570 ml or 750-1000 g.